Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topicStart Poll

> Changing color in the pool lights
Outline · [ Standard ] · Linear+
Alexmtnz
post Apr 2 2009, 10:34 PM
Post #1


Member
**

Group: Members
Posts: 14
Joined: 23-March 09
Member No.: 6,705



To Operate the Light and Change
Colors
Turn the light ON. The fi rst time the light is turned on,
the color sequence begins with the Alpine White. To
change the color, turn the light OFF and then ON within
three (3) seconds. Continue turning OFF and ON until
the desired light color mode is reached. See Table 1 for
the color mode sequence.
Table 1. Jandy WaterColors Lights Sequence
Sequence Order Color Modes
1 Alpine White
2 Sky Blue
3 Cobalt Blue
4 Caribbean Blue
5 Spring Green
6 Emerald Green
7 Emerald Rose
8 Magenta
9 Violet
10 Slow Color Splash
11 Fast Color Splash
12 America the Beautiful
13 Fat Tuesday
14 Disco Tech
NOTE When the light is turned OFF for more than
seven (7) seconds, it will remain in the color set
that is currently active. When the light is turned
back ON, the light will be on the same color set.
2.2 To Reset to the Beginning of the
Color Sequence
Turn the light OFF, wait four (4) to six (6) seconds, then
turn ON, the light will return to the beginning of the
color cycle (Alpine White).
NOTE If an AquaLink RS control system is being used
the color set can be selected using the indoor
controller.
NOTE To synchronize colors on multiple Jandy
WaterColors Light systems wired to separate
switches, perform the above actions on
all of their switches simultaneously. All
Jandy WaterColors Lights will synchronize
automatically if activated by the same switch.
No other accessories are required.
Top
User is offlinePM
Quote Post
Alexmtnz
post Apr 2 2009, 10:47 PM
Post #2


Member
**

Group: Members
Posts: 14
Joined: 23-March 09
Member No.: 6,705



QUOTE(Alexmtnz @ Apr 2 2009, 11:34 PM)
To Operate the Light and Change
Colors
Turn the light ON. The fi rst time the light is turned on,
the color sequence begins with the Alpine White. To
change the color, turn the light OFF and then ON within
three (3) seconds. Continue turning OFF and ON until
the desired light color mode is reached. See Table 1 for
the color mode sequence.
Table 1. Jandy WaterColors Lights Sequence
Sequence Order Color Modes
1 Alpine White
2 Sky Blue
3 Cobalt Blue
4 Caribbean Blue
5 Spring Green
6 Emerald Green
7 Emerald Rose
8 Magenta
9 Violet
10 Slow Color Splash
11 Fast Color Splash
12 America the Beautiful
13 Fat Tuesday
14 Disco Tech
NOTE When the light is turned OFF for more than
seven (7) seconds, it will remain in the color set
that is currently active. When the light is turned
back ON, the light will be on the same color set.
2.2 To Reset to the Beginning of the
Color Sequence
Turn the light OFF, wait four (4) to six (6) seconds, then
turn ON, the light will return to the beginning of the
color cycle (Alpine White).
NOTE If an AquaLink RS control system is being used
the color set can be selected using the indoor
controller.
NOTE To synchronize colors on multiple Jandy
WaterColors Light systems wired to separate
switches, perform the above actions on
all of their switches simultaneously. All
Jandy WaterColors Lights will synchronize
automatically if activated by the same switch.
No other accessories are required.
*




I am sorry , I tried to upload my program but i cant, this messages was displayed

THE FOLLOWING ERROR(S) WERE FOUND
Upload failed. You are not permitted to upload a file with that file extension.
Top
User is offlinePM
Quote Post
John Williams
post Apr 3 2009, 07:14 AM
Post #3


Enlightened One
*****************

Group: Authorized Member
Posts: 725
Joined: 23-May 03
Member No.: 3



Please save your program into a ZIP file.


--------------------
Visit our website at www.crouzet-usa.com for additional product and company information.
Top
User is offlinePMEmail Poster
Quote Post
Alexmtnz
post Apr 3 2009, 07:33 AM
Post #4


Member
**

Group: Members
Posts: 14
Joined: 23-March 09
Member No.: 6,705



Attached File  Jandy_watercolor_control.zip ( 41.99k ) Number of downloads: 669
Attached File  Jandy_watercolor_control.zip ( 41.99k ) Number of downloads: 669
QUOTE(John Williams @ Apr 3 2009, 08:14 AM)
Please save your program into a ZIP file.
*




Thanks up
Top
User is offlinePM
Quote Post

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

Reply to this topicTopic OptionsStart new topic

 


Lo-Fi Version
Time is now: 22nd August 2014 - 08:43 AM